BYD Atto 3 Clunks, Knocks & Rattles: What's Causing Them?

Basco LP10000 front sway bar link to suit BYD Atto 3

One thing you notice straight away in a BYD Atto 3 is how quiet it is. With no engine noise to cover them up, little clunks, knocks and rattles from the front end can sound a lot louder than they would in a petrol car. EVs also tend to be heavier than similar-sized petrol cars because of the battery, so the suspension and steering parts carry plenty of load. If your Atto 3 has started making a noise over bumps or when turning, here's a rundown of the usual suspects and how to narrow it down.

1. Sway bar links: a knock or rattle over bumps

Sway bar links (also called stabiliser links) join the sway bar to the suspension. Each has a small ball joint at each end, and once those wear, they often make a light knock or rattle over speed bumps, driveway entries and rough roads, especially when only one wheel hits the bump. They're one of the most common causes of front-end knocks on lots of cars, and one of the simpler jobs to fix.

2. Tie rod ends: clunks when steering, or vague steering

Outer tie rod ends connect the steering rack to each front wheel. When they wear, you might notice a clunk or knock when turning the wheel at low speed, steering that feels loose or less precise, or uneven wear on the front tyres. Because tie rod ends are part of the steering, any play should be checked promptly, and a wheel alignment is needed after replacing them.

3. Lower control arms and ball joints: clunks on braking or take-off

The front lower control arms locate each front wheel. Their rubber bushes and ball joints wear over time. A worn bush can cause a clunk when you brake, take off or go over bumps, and sometimes a wandering feel at speed. A worn ball joint can cause a knock over bumps or when turning. Depending on the condition of the arm, the ball joint can be replaced on its own or the complete arm swapped.

4. Motor and drivetrain mounts: a clunk on take-off

An EV still has mounts holding the motor and drivetrain in place. If you feel a thud when you pull away, or when you switch between Drive and Reverse, a worn mount is worth checking. We stock genuine BYD mounts for the Atto 3: the BEM4041OE left-hand front ($159.95), the BEM4042OE right-hand front ($149.95) and the BEM4043OE rear ($159.95).

Other noises worth knowing

Not every noise is a clunk. A humming or droning noise that rises with speed can point to a wheel bearing, such as the Basco WBH1879 front hub ($199.95) or WBH1880 rear hub ($249.95). A rattle or squeal under braking can come from worn or loose brake pads. We carry Bendix DB2732-EV front pads ($138.95) and DB2733-EV rear pads ($129.95).

How to narrow it down

  • Note when it happens: over bumps, when turning, when braking, or when pulling away. Each points to different parts.
  • Note where it comes from: front or rear, left or right.
  • Try it with the windows down on a quiet street at low speed, where an EV makes it easy to hear.
  • Have it inspected. A mechanic can check for play in the joints with the car safely raised, which is the most reliable way to find the culprit.

Worn parts on one side often mean the other side has done the same kilometres, so many mechanics recommend checking, and often replacing, left and right together.

A quick safety note

Steering and suspension parts keep your wheels where they should be. If a clunk comes with loose steering, pulling to one side or a sudden change in how the car drives, get it checked as soon as possible.

Not sure which part fits your Atto 3?

Check the fitment table on each product page, read our How to Check Fitment guide, or just ask us. Send your rego or VIN to sales@hoorooautomotiveparts.com.au or call the HOOROO Crew on (07) 5495 1839, and we'll confirm the right part before you order. Spend $160 or more and shipping is free Australia-wide, applied automatically at checkout.

Find it. Fit it. Fair Dinkum™.
The HOOROO Crew

This article is general information only. Always have your vehicle inspected and repaired by a qualified mechanic.