GWM Tank 300 Front-End Clunks: Common Causes & Fixes

Basco BCA2241 and BCA2242 front lower control arm pair to suit GWM Tank 300

The GWM Tank 300 is built for the rough stuff, with a ladder-frame chassis and off-road ability. All that corrugated-road and bush-track driving is hard on suspension joints and bushes, though. If your Tank 300 has started clunking, knocking or feeling a bit loose over bumps, here are the usual suspects at the front end (and one at the back), plus how to narrow it down.

1. Front sway bar links: knocks over bumps

Sway bar links join the sway bar to the suspension, with a small ball joint at each end. Worn links often make a light knock or rattle over speed bumps, potholes and uneven tracks, particularly when one wheel hits a bump on its own. They're a common source of front-end noise and a relatively simple fix.

2. Lower control arms: clunks on braking, take-off or bumps

The lower control arms carry a lot of the load at each front wheel. Their bushes and ball joints wear over time, especially with off-road use. Worn lower arm bushes can cause a clunk when braking or taking off, a knock over bumps, or a vague, wandering feel on the highway.

3. Upper control arms: knocks and alignment that won't hold

The Tank 300's front end also uses upper control arms. Worn upper arm bushes or ball joints can cause knocking over bumps, uneven tyre wear, or an alignment that's hard to keep right.

A wheel alignment is needed after replacing control arms.

4. Engine and transmission mount: a thud on take-off

Not every clunk is suspension. If you feel a thud when pulling away or shifting between Drive and Reverse, a worn engine or transmission mount is worth checking.

Noise from the back?

Rear clunks over bumps can come from the rear sway bar links or trailing arm bushes:

How to narrow it down

  • Note when it happens: over bumps, when turning, when braking, or when pulling away.
  • Note where it comes from: front or rear, left or right.
  • Check after off-road trips. Look for torn boots, cracked bushes or anything that's taken a hit.
  • Have it inspected. A mechanic can check for play in the joints with the vehicle safely raised, which is the most reliable way to find the cause.

When one side is worn, the other has usually done the same kilometres, so many mechanics recommend checking, and often replacing, left and right together.

A quick safety note

Suspension and steering joints keep your wheels where they belong. If a clunk comes with loose steering, pulling to one side or a sudden change in handling, get it checked as soon as possible, especially before heading off-road or towing.

Not sure which part fits your Tank 300?

Check the fitment table on each product page, read our How to Check Fitment guide, or just ask us. Send your rego or VIN to sales@hoorooautomotiveparts.com.au or call the HOOROO Crew on (07) 5495 1839, and we'll confirm the right part before you order. Spend $160 or more and shipping is free Australia-wide, applied automatically at checkout.

Find it. Fit it. Fair Dinkum™.
The HOOROO Crew

This article is general information only. Always have your vehicle inspected and repaired by a qualified mechanic.